MSI ATX Motherboard G52-MA00362 - Manual (Page 70)

Award ® BIOS Setup
3-27
This section describes configuring the PCI bus system. PCI
(Personal Computer Interconnect) is a system which allows I/O devices
to operate at speeds nearing the speed the CPU itself uses when commu-
nicating with its own special components. This section covers some
very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
PNP OS Installed
When set to [Yes], BIOS will only initialize the PnP cards used for boot-
ing (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP
operating system like Windows 98. When set to [No], BIOS will initial-
ize all the PnP cards. So, select [Yes] if your operating system is Plug &
Play aware.
Clear ESCD
This item allows you to clear ESCD. Available options are [Disabled]
and [Enabled]. Default value is [Disabled].
CMOS Setup Utility - Copyright(C) 1984-2001 Award Software
PnP/PCI Configuration
PNP OS Installed [No]
Clear ESCD [Disabled]
Resources Controlled By [Auto (ESCD)]
IRQ Resources Press Enter
DMA Resources Press Enter
PCI/VGA Palette Snoop [Disabled]
Item Help
Menu Level
8
Select Yes if you are
using a Plug and Play
capable operating system
Select No if you need the
BIOS to configure non-
boot devices
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe Defaults F7:Optimized Defaults
PnP/PCI Configurations
x
x