MITSUBISHI ELECTRIC LT-4260 - Manual (Page 14)

13
1. Headphone
The Headphone Output sends the LCD Displays connected
audio signals to a pair of headphones. The audio output from
the TV’s speakers will be unavailable.
2. Audio Out
The Audio Output sends the LCD Displays connected audio
signals to an A/V receiver or other equipment.
3. Composite Input
These inputs can be used for the connection of a VCR, Super
VHS (S-VHS) VCR, laser disc player, or other A/V device to
the TV. With each input, you may connect to the S-VIDEO
or VIDEO terminal but not to both.
4. Component Input
This input can be used for the connection of A/V equipment
with component video outputs, such as a DVD player or
compatible Video Game System. Please see Appendix A, page
61, for signal compatibility.
5. PC Input
This input can be used for analog RGB signals from a
personal computer. Supported resolutions include VGA,
SVGA, XGA, and WXGA only. Please see Appendix B, page
61 for supported PC Resolutions.
Side Panel Input/Output
�����������������������
�����������������������
������������
������������
��
�
�
�
�
�
� � �
�
�����
6. PC Audio Input
This is used to send the sound from a computer to the LCD
Displays speakers.
7. HDMI™/MonitorLink™ Input
This is a Mitsubishi-exclusive proprietary digital interface for
the display of high quality digital video signals from Mitsubishi
products such as the HD-6000 HDTV Receiver/Controller.
All video signals, both analog and digital are sent digitally to
your Mitsubushi TV. Can also be used as a HDMI™ input
for other compatible sources.
Note: The HDMI™-HDTV input terminal is compliant
with the EIA-861 standard and is not intended for use with
personal computers.
8. MonitorLink™ control/RS-232C for HD-6000
A digital control interface that works in parallel with
MonitorLink™. While MonitorLink™ provides the digital
video signal, MonitorLink™ Control provides enhanced
functioning such as automatic power ON/OFF and input
selection. Can also be used with other compatible RS-232C
external devices. Please visit www.mitsubishi-tv.com for more
information or RS-232C command structure.
9. Authorized Card Reader
This USB input connects only to the HD-6000 and enables
the use of the media card reader located on the LCD Display
side panel. See Page 64 for details.
CAUTION
DO NOT CONNECT ANY USB
DEVICE TO THIS INPUT.
10. DVI Audio Input
Use this input to provide sound when an HDMI to DVI
adapter is used.