Dvd player/video game with component video, Other s-video device, Y to y – MITSUBISHI ELECTRIC LT-4260 User Manual

Page 32: Cb or pb to pb, Figure 4), Figure 5)

Advertising

DVD Player/Video Game with

Component Video

(Figure 4)

1. Connect the Component Video cables from

(YCb Cr or Y Pb Pr) VIDEO OUT on the back

of the DVD player to COMPONENT VIDEO

INPUT on the LCD Display side panel. The correct

connections are:

Y to Y

Cb or Pb to Pb

Cr or Pr to Pr

2. Connect a set of audio cables from AUDIO OUT

on the back of the DVD player to COMPONENT

VIDEO Input/AUDIO RIGHT & AUDIO LEFT

on the LCD Display side panel.

• The red cable connects to the R (right)channel
• The white cable connects to the L (left) channel

NOTE: Some video game systems support component

connections. Please refer to your video game
console Owner’s Guide.

NOTE: If your DVD player supports progressive

scan playback, be sure to set your player

accordingly. Please refer to your DVD player’s
Owner’s Guide.

Other S-Video Device

(Figure 5)

1. Connect a S-Video cable from VIDEO OUT on the

device back panel to VIDEO INPUT on the LCD

Display side panel.

2. Connect a set of audio cables from AUDIO OUT

on the device back panel to VIDEO INPUT/

AUDIO RIGHT & AUDIO LEFT on the LCD

Display side panel.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

See Appendix A, page 61, for component video

signal compatibility information.

For digital audio connections, see your DVD

and A/V receiver Owner’s Guides.

Figure 4. Connecting a DVD Player with Component Video.

Figure 5. Connecting an S-Video Device.

Connecting a DVD Player or Other S-Video Device Directly to

LCD Side Panel

NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to
the LCD Display.

��

�

��

�

��

��
��

��

�

��

��
��

�

�
�

�

��

�
�

�

��

�

��

�

Advertising

Popular Brands

Popular manuals