Set-back configuration setup (continued) – MITSUBISHI ELECTRIC LT-4260 User Manual
Page 20
19
Set-Back Configuration Setup (continued)
8. Connect the HDMI™ Cable from the HDMI™ Output connector on the back of the HD-6000 to the
HDMI™/MonitorLink Input connector located on the back of the LCD Display.
9. Connect the USB Cable from the Authorized Card Reader connector on the back of the HD-6000 to
the AUTHORIZED CARD READER connector on the back of the LCD Display.
10. Connect the RS-232C Cable from the MonitorLink™ Control RS-232C connector on the back of
the HD-6000 to the RS-232C/MonitorLink™ Control for HD-6000 connector on the back of the
LCD Display.
HD-6000 Back Panel (section detail)
LCD Display Back Panel (section detail)
HD-6000 Back Panel (section detail)
LCD Display Back Panel (section detail)
HD-6000 Back Panel (section detail)
LCD Display Back Panel (section detail)