MITSUBISHI ELECTRIC LT-4260 - Manual (Page 27)

26
Wall Mount Configuration Setup (continued)
11. Connect the RS-232C Cable from the MonitorLink Control RS-232C connector on the back of the
HD-6000 to the RS-232C/MonitorLink Control for HD-6000 connector on the back of the LCD
Display.
12. Connect the AC Power Cord from the back of the HD-6000 to the back of the LCD Display.
HD-6000 Back Panel (section detail) LCD Display Back Panel (section detail)
HD-6000 Back Panel (section detail) LCD Display Back Panel (section detail)