MITSUBISHI ELECTRIC LT-4260 - Manual (Page 7)

6
IMPORTANT SAFEGUARDS, continued
21. Transport/Handling
(a) Be sure to use another person to lift or carry this product. It is recommended that the product be carried by two
people holding it with both of their hands — one hand on each side of the product.
(b) Use caution when transporting the product. Be sure that items such as belt buckles, watches, shirt buttons, and
zippers do not scratch or rub the screen or cabinet.
(c) Do not grip the cut-outs shown in Diagram 1. These cut-outs are not handles.
22. LCD Monitor
This monitor uses a technology composed of over 2.9 million thin film transistors. It is common to find a few
colored (non-active) “dots” on the screen. Do not be alarmed. This is a result of the manufacturing process found in
all panels. Your picture performance will not be affected.
23. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as recommended by the manufacturer. When mounting
the LCD display to a wall or ceiling, the stand and Set-Back Box (HD-6000) must be removed from the back of the
LCD display.
CAUTION
This product needs to be attached to the included stand or other optional mounting hardware.
Use the following optional accessories. Use with other optional accessories is capable of resulting in
instability causing possible injury.
Manufacturer’s name: Mitsubishi Digital Electronics America, Inc.
Tilt Wall Mount: LMOUNT-42T
To order LMOUNT-42Ts, please call our Parts Department at (800)553-7278.
Please contact Mitsubishi Digital Electronics America, Inc for approved optional accessories.
Diagram 1.
DO NOT USE AS HANDLES