Recommended), Figure 6) – MITSUBISHI ELECTRIC LT-4260 User Manual
Page 33
32
Connecting a Satellite Receiver/Cable Box Directly to
LCD Side Panel
Satellite Receiver/Cable Box with
Component Video Connections
(Recommended)
(Figure 6)
1. Connect RCA-type cables from the Satellite
receiver/Cable Box outputs to the LCD Display
side panel. Component VIDEO INPUT may be
used for 480i, 480p, 720p or 1080i components.
2. Connect the L (left) and R (right) audio
cables from the Satellite/Cable Box receiver to
COMPONENT VIDEO INPUT/AUDIO
RIGHT & AUDIO LEFT on the LCD Display
side panel.
3. To utilize the benefits of a digital A/V receiver,
connect your Satellite/Cable Box receiver’s digital
audio out to a digital input on your digital A/V
receiver.
See your Satellite/Cable Box receiver and A/V
receiver Owner's Guides for instructions.
See Appendix A, page 61 for component video
signal compatibility information.
For digital audio connections, see your DTV
receiver and A/V receiver Owner’s Guides.
Figure 6. Connecting a Satellite receiver with
component Video Connections.
NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to the
LCD Display.
����������������������
�����������������������������������������������������
�����
�
�
������
�
��
��
�������
���
�������
����������
��
������
���������
����
����
�������
������������������������
�����������
�������
���������
�����
���
�
������������
�����������
�
�
�
�
�
�
�
�
�����
���
�����
�
�
������
�