Miller Electric MOG-350 - Manual (Page 15)

OM-808 Page 11
3-2. Selecting A Location And Moving Resistance Grid Or Multi-Grid Rack
Ref. ST-124 643-A / Ref. ST-151 556 / ST-161 154-A
Y Turn Off welding power
source BEFORE moving grid
or rack.
Locate grid(s) near welding power
source.
Resistance Grid
1 18 in (460 mm) Open Space
On Front Side
Location should allow operation of
controls.
2 Handles
Use handles to lift unit.
Multi-Grid Rack
3 Minimum 20 in (508 mm)
Open Space On Front And
Rear Sides
Location should allow access to
rear panel and removal of grids.
4 Lifting Eyes
Use four sets of lifting eyes to move
rack.
Front
Front
Rear
2 1
3
4
4
Have two persons of adequate physical
strength lift individual grids at handles.