Miller Electric MOG-350 - Manual (Page 20)

OM-808 Page 16
SECTION 4 – OPERATION
WARNING
ELECTRIC SHOCK can kill.
•
Keep all panels and covers securely in place.
•
Do not touch electrode holders of opposite polarity at the same time.
•
Separate electrode holders of opposite polarity to prevent contact.
•
See ANSI Z49.1 and OSHA TITLE 29, CHAPTER XVII, PART 1910, Subpart Q.
4-1. Controls (Dual Model Shown)
Ref. ST-161 155
1 Coarse Amperage Control
2 Paralleling Switch
Included on dual models only.
3 Optional Polarity Switch
4 2-1/2 Ampere Switch
This switch is included on units with
Polarity switch. Switch is optional
for all other models.
5 Fine Amperage Control
1 2 1
3
4
5 5
4
4-2. Safety Equipment
Wear the following while welding:
1 Dry, Insulating Gloves
2 Safety Glasses With Side
Shields
3 Welding Helmet With Correct
Shade Of Filter (See ANSI
Z49.1)
sb3.1 1/94
1 2 3