Marantz DV8300 - Manual (Page 10)

Connecting Up 2
10
Easy Setup
This easy setup is the minimum set of connec-
tions you need to start watching DVD video
discs. Both sound and picture are fed directly to
your TV using the supplied audio and video
cables. For other possible connections, see
pages 11 and 12.
Connecting
audio and video
cables
Be sure to insert each
plug fully for the best
connection. The plugs
and jacks are colour-
coded to make connection easier.
Connecting system control
connections
By connecting this DVD player to another
Marantz audio component using a supplied
System Control cable, you can remotely
operate the components as a single system.
• When connecting to component with a remote
sensor (such as the SR-14, SR-18, SR-19), be
sure to connect the REMOTE CONTROL IN
jack of this DVD player to the REMOTE
CONTROL OUT jack of the component with
the remote sensor.
• When connecting to component which is not
equipped with a remote sensor, be sure to
connect the component to the REMOTE
CONTROL OUT jack of this DVD player.
Synchronized power on and off
• Connect with the remote control output jack of
a component (such as the SR-14, SR-18, SR-19)
which is compatible with Marantz remote
control system. The remote control allows to
switch the power of this DVD player to “POWER
ON and Standby mode”.
Note
Be sure to leave power switch on the Front
panel in the power mode.
Remote switch
• When using this DVD player independently, set
this switch to INTERNAL. When using this DVD
player in a system with a Marantz tuner or timer
equipped with a remote sensor, set the switch
to EXTERNAL.
Important
Before making or changing any rear panel connections,
make sure that all components are switched off and
unplugged from the wall outlet.
REMOTE CONTROL
DIGITAL
OUTPUT
VIDEO OUTPUT
R
1
AUDIO OUTPUT
COMPONENT OUT
R
IN
L
INTERNAL
CENTER
S1/S2 2
SUB W.
SURR.
L
EXTERNAL COAXIAL
VIDEO
OPTICAL
Y
C B
/P R
/P
C R
B
2 1
FRONT
1
2 3
Connect to a composite video input
on your TV using the supplied Audio/
Video cable.
Plug into a standard AC
wall outlet. Connect to a pair of stereo audio inputs
on your TV using the supplied Audio/
Video cable.