Marantz DV8300 - Manual (Page 30)

Playing Discs 5
30
Using repeat play
You can set the player to repeat individual tracks on CDs or Video-
CDs, chapters/tracks or titles/group on DVD discs, or the whole disc.
It's also possible to loop a section of a disc.
You can use the repeat together with the programming mode to repeat
the tracks/chapters in the program list (see page 27 for how to make a
program list).
You can’t use any repeat mode or looped play with a Video CD playing
in PBC mode.
Looped playback is not possible with SACD.
Note
• You can’t use repeat and random play at the same time.
• If you switch camera angle during repeat play, repeat play is cancelled.
1 Press REPEAT during playback to select a repeat mode.
Each press switches the repeat mode:
• Repeat Chapter/Track
• Repeat Title/Group
• Repeat Off
• Repeat Track
• Repeat All
• Repeat Off
2 To resume normal playback, press CLEAR.
Tip
You can use repeat play with program play. During program play, press
REPEAT.
Looping a section of a disc
1 Press (REPEAT) A-B once at the start of the section you want to
repeat, then again at the end.
Playback immediately jumps back to the start point and plays the loop round
and round.
• On a DVD disc, the start and end points of the loop must be in the same
title/group.
2 To resume normal playback, press CLEAR.
• You can also repeat a section of a disc just once by pressing 3 to mark the
end point (instead of A-B).