Marantz DV8300 - Manual (Page 42)

DVD Setup Menu 7
42
MPEG Out
• Default setting: MPEG
3 PCM
You only need to make this setting if you connected
the player to another component (AV amplifier, etc.)
using one of the digital outs.
If your AV amplifier (or other connected compo-
nent) is compatible with MPEG audio, set this to
MPEG, otherwise set it to MPEG
3 PCM (MPEG
audio is converted to more compatible PCM
audio). Check the manual that came with the other
component if you’re unsure whether it is MPEG
audio compatible.
—
—
—
—
—
V2 Video1 General A2 Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Audio1
Off
Dolby Digital
DTS
3 PCM
Down Sample On
MPEG
MPEG
3 PCM
2ch Area
SETUP
Digital Out
• Default setting: On
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave it
On. Note that you can’t switch on/off the optical
and coaxial outputs individually.
—
—
—
—
—
V2 Video1 General A2 Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Audio1
Off
Dolby Digital
DTS
3 PCM
Down Sample On
MPEG
3 PCM
On
Off
SETUP
SACD Playback
• Default setting: 2ch Area
SACD discs can be divided up into several different
areas – stereo audio, 5.1 channel audio and, for
hybrid SACDs, standard CD audio. The SACD
Playback setting enables you to select which area
of the disc you want to play.
—
—
—
—
V2 Video1 General A2 Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Audio1
Off
Dolby Digital
DTS
3 PCM
Down Sample On
2ch Area
Multi-ch Area
CD Area
SETUP
Note
If you select an area that isn’t on the disc loaded,
a different area of the disc will play. For example, if
you choose standard CD audio but the disc
loaded is not a hybrid SACD, the stereo SACD
audio will play.
Virtual Surround
• Default setting: Off
If you connected your DVD player using only the
stereo analog outputs and set Audio Out (see below)
to 2 Channel, you can simulate surround sound by
setting Virtual Surround to TruSurround.
—
—
—
Audio2 Video1 Language General A1 V2
Exit Move
Virtual Surround
Audio Out
Speaker Setting
Gain Setting
CD Digital Direct
Off
TruSurround
Fix
Off
SETUP
Note
• There is no effect when the audio source is DVD-
Audio, DTS or 96 kHz LPCM or during CD, MP3 or
SACD playback.
• The digital audio output level is reduced when
playing 2 channel Dolby Digital DVDs or Video CDs
with TruSurround selected. If you play a multichan-
nel Dolby Digital DVD with Dolby Digital to PCM
conversion (see page 41) and TruSurround
selected, there is no digital output.
• How good the surround effect is varies with the
disc.
TruSurround
TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.