Miller Electric Trailblazer DC - Manual (Page 24)

OM-4407 Page 20
5-7. Connecting To Weld Output Terminals
Y Stop engine.
Y Do not connect to CC and CV
terminals at the same time.
AC/DC Models:
1
Work Weld Output Terminal
2 Stick/TIG (CC) Weld Output
Terminal
3 Wire /CV Weld Output Terminal
For MIG welding, connect work cable
to Work terminal and wire feeder
cable to Wire (CV) terminal.
For Stick/TIG welding, connect work
cable to Work terminal and electrode
holder cable to Stick/TIG (CC)
terminal.
DC Only Models:
4
Negative (−) Weld Output
Terminal
5 Stick/TIG (+) Weld Output
Terminal
6 Wire (+) Weld Output Terminal
For MIG welding, connect work cable
to Negative (−) terminal and wire
feeder cable to CV (Wire) terminal.
For Stick welding, connect work
cable to Negative (−) terminal and
electrode holder cable to CC (Stick/
TIG) terminal.
For TIG welding, connect work cable
to CC (Stick/TIG) terminal and elec-
trode holder cable to Negative (−)
terminal.
802 850 / Ref. 206 422 / 204 353
3 2 1
OR
Weld output terminals on
units with AC/DC output.
Weld output terminals on
units with DC output only.
6 5 4