Milan Technology MIL-SM8002TG - Manual (Page 22)

14
configuration mode privileged EXEC
mode, or end.
Commands Set List
System Commands Set
Commands Command Level Description Defaults Example
system name
[systemname]
Global
configuration mode
Set switch system name string
Switch (config)# system
name xxx
system location
[system location]
Global
configuration mode
Set switch system location string
Switch (config)# system
location LA
system description
[systemdescription]
Global
configuration mode
Set switch system description
string
Switch (config)# system
description xxx
system contact
[systemcontact]
Global
configuration mode
Set switch system contact
window string
Switch (config)# system
contact John
ip address
[ip-address]
[subnet-mask ]
[ gateway]
Global
configuration mode
Use the ip address interface
configuration command to set an
IP address for a switch. Use the
no form of this command to
remove an IP address or to
disable IP processing.
Switch (config)# ip
address 192.168.1.77
255.255.255.0
192.168.1.254