Milan Technology MIL-SM8002TG - Manual (Page 31)

23
[3584~3839] range 14
[3840~4094] range 15
VLAN protocol
[Groupname] add
[portNumber] [tagged |
untagged]
VLAN database
mode
Set the port of some port
group tagged or untagged
Switch (vlan)# vlan protocol
v2 add 5 tagged
VLAN protocol
[Groupname] delete
[portNumber]
VLAN database
mode
Remove the port from its port
group.
Switch (vlan)# vlan protocol
v2 delete 5
show vlan [Groupname]
[GroupID] or show vlan
VLAN database
mode
Show VLAN of Group Name
or VLAN ID information
vlanid: 1 ~ 4094
Switch (vlan)# show vlan v2 2
show vlan protocol
VLAN database
mode
show protocol vlan
Protocol
ip
ipx
netbios
Switch (vlan)# show vlan
protocol
port [port ID] pvid [port
VID] ingressfilter1 [on
| off] ingressfilter2 [on
| off]
VLAN database
mode
Set Port PVID and Ingress
Filter Rules1 & Ingress Filter
Rules2
Switch (vlan)# port 2 pvid 2
ingressfilter1 off ingressfilter2
on
show port [port ID]
VLAN database
mode
show Port PVID and Ingress
Filter Rules1 & Ingress Filter
Rules2
Switch (vlan)# show port 2
Port ID: 2
Port Vid: 2
Ingress 1 Filter: Disable
Ingress 2 Filter: Enable
Spanning Tree Commands Set
Commands Command Level Description Defaults Example
show spanning-tree User EXEC mode
Display a summary of the
spanning-tree states.
Switch> show spanning-tree
System:
Priority: 32768
Max Age: 20
Hello Time: 2
Forward Delay: 15