Milan Technology MIL-SM8002TG - Manual (Page 41)

33
802.1x Commands Set
Commands
Command
Level
Description Defaults Example
show 8021x User EXEC mode
Display a summary of the 802.1x
properties and also the port sates.
Switch> show 8021x
8021x [on | off]
Global
configuration mode
Use the 802.1x global configuration
command to enable 802.1x
protocols. Use the no form of the
command to restore to default
Disable Switch (config)# 8021x on
8021x system radiusip
[RadiusServerIP]
Or
no 8021x system
radiusip
Global
configuration mode
Use the 802.1x system radius IP
global configuration command to
change the radius server IP.
Use the no form of this command to
return to the default interval.
Switch (config)# 8021x
system radiusip
192.168.1.254
8021x system sharekey
[Sharekey]
or
no 8021x system
sharekey
Global
configuration mode
Use the 802.1x system sharekey
global configuration command to
change the shared key value.
Use the no form of this command to
return to the default interval.
Switch (config)# 8021x
system sharekey 123456
8021x misc quietperiod Global Use the 802.1x misc quiet period Switch (config)# 8021x