Milan Technology MIL-SM8002TG - Manual (Page 27)

19
State [Enable | Disable]
Interface
configuration mode
Use the state interface
configuration command to
specify the state mode of
operation for Ethernet ports.
Use the disable form of this
command to disable the port.
Enable
Switch (config)# interface
fastEthernet 0/1
Switch (config-if)# state
disable
show interface
configuration
Interface
configuration mode
show interface configuration
status
Switch (config)# interface
fastEthernet 0/1
Switch (config-if)# show
interface configuration
show interface status
Interface
configuration mode
show interface actual status
Switch (config)# interface
fastEthernet 0/1
Switch (config-if)# show
interface status
show interface
accounting
Interface
configuration mode
show interface statistic counter
Switch (config)# interface
fastEthernet 0/1
Switch (config-if)# show
interface accounting