Muratec F-160 - Manual (Page 25)

1.18
Getting started
Fax Ready mode
Use it if: Your fax machine uses its own phone line and doesn’t share it with a
phone or an answering machine.
In this mode: Your fax machine answers each call and attempts to receive a fax.
To select Fax Ready:
1 If there’s a document in the feeder, press STOP so it will feed out.
2 Press AUTO ANSWER until the Auto Answer light glows.
3 Press / PROGRAM , I , and then press ENTER five times. The LCD shows your
current default reception mode:
4 Press or / PROGRAM until the LCD shows:
5 Press ENTER to save the setting.
6 Press STOP to return the machine to standby mode.
Fax/Tel Ready mode
The Fax/Tel Ready mode is a combination of the Fax Ready and Tel Ready modes.
Use it if: An optional handset is installed on your fax machine
and
You’re using the machine as both a fax machine and a telephone
In this mode: Your fax machine answers each call without ringing. If you receive a
voice call, it alerts you with a special ring.
To select Fax/Tel Ready:
1 If there’s a document in the feeder, press STOP so it will feed out.
2 Press AUTO ANSWER until the light Auto Answer light glows.
3 Press / PROGRAM , I , and then press ENTER five times. The LCD shows your
current default reception mode:
4 Press or / PROGRAM until the LCD shows:
5 Press ENTER to save the setting.
6 Press STOP to return the machine to standby mode.
Now your fax machine receives faxes silently but also alerts you when a regular
voice call comes in. (Your fax machine also beeps once at the end of each reception.)
If a voice call comes in, your fax machine detects it and sounds a special ring. If you
hear it, answer using your optional handset.
Note: This Fax/Tel Ready mode won’t turn off ringers on other telephones in your
house or office. Other phones won’t distinguish between fax and voice calls.
Fax/Tel Ready
Program/Enter
Fax Ready
Program/Enter
Fax Ready
Program/Enter
Fax Ready
Program/Enter