Muratec F-160 - Manual (Page 87)

Beyond the Basics
7 Press / PROGRAM until the list you want appears.
8 Press ENTER .
The LCD now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press STOP
to return your machine to standby mode.
If you do want to enter or change this key’s programming, go back to step 4.
If you want to enter or change another key’s programming, go back to step 2.
Programming a document storage operation
To program a programmable one-touch key to store an F-Code polling document,
two things must be true:
• The F-Code bulletin box must exist on your fax machine.
• You must know the F-Code bulletin box’s two-digit number (01-50) and name.
To program your programmable one-touch to store a regular polling document or F-
Code polling document:
1 Press / PROGRAM , C , 1, ENTER . The LCD shows the first empty programmable
one-touch number available:
Note: If a programmable one-touch number other than 65 appears on the
LCD , it means that you have already entered a number for 65.
Note: To erase a programmable one-touch key, see page 2.58.
2 Press the key you want to program or change. Here, we’ve selected 69.
Note: If your previous command for this key was to store a document and
you want to keep this key programmed to store a document, use these
instructions to make changes. But if you want to assign this key to a
completely different operation (for a delayed transmission, for exam-
ple), then you first must erase the stored command before
programming the new one.
3 To select a different programmable one-touch key than the one that appears
on the
LCD , press that key now.
4 Press ENTER . The LCD asks what kind of operation you want to program into
the programmable one-touch:
Note: If changing a previously stored command, skip to step 7.
5 Press / PROGRAM until “Store” appears.
6 Press ENTER . The LCD asks which storing menu you want to program into the
programmable one-touch:
7 Press / PROGRAM until the mode you want appears.
8 Press ENTER .
If you select the “Store Polling Doc” operation, skip to step 14.
If you select the “Store F-Code Doc” operation, go on to step 9.
9 The LCD asks which F-Code bulletin box you want to use.
10 Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box in which you want to store the document. Here, we’ve entered
0, 3:
11 To select a different F-Code box than the one that appears on the LCD , enter
that box number now.
Select F-Code Box
03:Muratec America
Select F-Code Box
01:Murata Machinery
69:Store Polling Doc
Program/Enter
69: Type: Store
Program/Enter
69: Type: Comm.
Program/Enter
Select Program No.
69:No Number Stored
Select Program No.
65:No Number Stored
2.56