Muratec F-160 - Manual (Page 86)

Beyond the Basics
10 Press ENTER . The LCD shows:
Note: If this box doesn’t have a password, press ENTER . Then skip to step 12.
11 Use the numeric keypad to enter the ITU - T password for the box. Here, we’ve
entered 654321:
When finished, press ENTER .
12 If you want the transmission to begin immediately every time you press the
key, press
ENTER and skip to step 15.
If you want to delay the transmission (perhaps to take advantage of lower
phone rates), press
COM - OPTIONS , ENTER .
13 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax could perform the command:
14 Press ENTER , ENTER .
15 The LCD now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press STOP
to return your machine to its usual standby mode.
If you do want to enter or change this key’s programming, go back to step 4.
If you want to enter or change another key’s programming, go back to step 2.
Programming printouts
To program a programmable one-touch key to print a list:
1 Press / PROGRAM , C , 1, ENTER . The LCD shows the first empty programmable
one-touch number available:
Note: If a programmable one-touch number other than 65 appears on the
LCD , it means that you have already entered a number for 65.
Note: To erase a programmable one-touch key, refer to page 2.58.
2 Press the key you want to program or change. Here, we’ve selected 68.
Note: If your previous command for this key was for printing a list and you
want to keep this key programmed for printing a list, use these
instructions to make changes. But if you want to assign this key to a
completely different operation (for a delayed transmission, for exam-
ple), then you first must erase the stored command before
programming the new one.
3 To select a different programmable one-touch key than the one that appears
on the
LCD , press that key now.
4 Press ENTER . The LCD asks which operation you want to program into the pro-
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
5 Press / PROGRAM until “List.” appears.
6 Press ENTER . The LCD asks which list you want to program into the program-
mable one-touch:
68:Print One-Touch
Program/Enter
68: Type: List
Program/Enter
68: Type: Comm.
Program/Enter
Select Program No.
68:No Number Stored
Select Program No.
65:No Number Stored
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
Enter Password
654321_
Enter Password
_
2.55