Setting up a usb driver in windowsme, Setting up a usb driver in windows me – Iomega SBG1000 User Manual
Page 113
SBG1000 Wireless Cable Modem Gateway User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver in Windows Me
Be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB connection, the Add New Hardware
Wizard window is displayed:
1
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
2
If the window above is displayed, click Finish. Otherwise, be sure the Motorola SBG1000 Wireless Cable
Modem Gateway CD-ROM is correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.