Gateway > lan — dhcp server config page, Caution – Iomega SBG1000 User Manual
Page 56
50
SBG1000 Wireless Cable Modem Gateway User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Gateway > LAN — dhcp server config Page
Experienced network administrators only can use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong
knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — advanced page fields
Field
Description
LAN IP Address
The SBG1000 LAN IP address, in
. The default is 192.168.0.1.
, in dotted-decimal format. The default is 255.255.255.0.
Starting IP Address
Sets the starting IP address assigned by the
SBG1000
DHCP server to clients, in
dotted-decimal format. The default is 192.168.0.2.
# of DHCP Users
Sets the number of clients for the
SBG1000
DHCP server to assign a private IP address.
There are 253 possible client addresses. The default is 253.
DHCP Server Lease
Time
Sets the time in seconds that the
SBG1000
server leases an IP address to a client. The
default is 60 seconds.
Domain Name
Sets the
for the SBG1000 LAN. The default is None.
Time To Live
Sets the
(hop limit) for outbound
. The default is 64.
Interface Maximum
Transmission Unit
Sets the SBG1000 LAN
, in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Apply
Click to apply your changes. You must reboot the
SBG1000
.