Changing the default password, Changing the default, Password – Iomega SBG1000 User Manual
Page 40: Caution
34
SBG1000 Wireless Cable Modem Gateway User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Changing the Default Password
To change the default password:
1
On the SBG1000 Setup Program screen, click Admin to display the ADMIN — basic page:
2
Type the old password in the Old Password field; the default password is “motorola” (this field is case
sensitive).
3
Type the new password in the New Password field.
4
Type the new password again in the Verify Password field.
5
Click Apply to apply your changes.
Caution!
To prevent unauthorized configuration, change the default password immediately when you first
configure the Motorola SBG1000 Wireless Cable Modem Gateway.