Iomega SBG1000 - Manual (Page 37)

31 SBG1000 Wireless Cable Modem Gateway User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Configuring the SBG1000
Configuring the SBG1000 includes:
•
Starting the SBG1000 Setup Program (see page 32)
•
Changing the Default Password (see page 34)
•
Getting Help (see page 35)
•
Setting the Firewall Policy (see page 36)
For more information about configuration, see “Configuring TCP/IP” on page 57, “Setting Up the Wireless LAN” on
page 71, “Configuring the Print Server” on page 81, or “Setting Up a USB Driver” on page 99.
For normal operation, you do not need to change most default settings. The following caution statements
summarize the issues you must be aware of:
Caution!
To prevent unauthorized configuration, change the default password immediately when you first
configure the Motorola SBG1000 Wireless Cable Modem Gateway. See
“Changing the Default
Password” on page 34
Firewalls are not foolproof. Choose the most secure firewall policy you can. See “Setting the Firewall
Policy” on page 36.
For a wireless LAN only, be sure you follow the instructions in “Setting Up the Wireless LAN” on
page 71.