Iomega SBG1000 - Manual (Page 64)

58 SBG1000 Wireless Cable Modem Gateway User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Configuring TCP/IP in Windows 95, Windows 98, or Windows Me
1 On the Windows Desktop, click Start.
2 Select Settings and then Control Panel from the pop-up menus to display the Control Panel window.
3 Double-click the Network icon to display the Network window:
4 Select the Configuration tab.
5 Verify that TCP/IP is installed for the adapter used to connect to the SBG1000. If TCP/IP is installed, skip to
step 10. If TCP/IP is not installed for the adapter, continue with step 6.
6 Select the adapter to use for the SBG1000 connection and click Add. The Select Network Component Type
window is displayed:
7 Click Protocol and click the Add button.
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.