Setting up a usb driver in windowsxp, Setting up a usb driver in windows xp – Iomega SBG1000 User Manual
Page 114
SBG1000 Wireless Cable Modem Gateway User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver in Windows XP
Be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB connection, the Found New
Hardware Wizard window is displayed:
1
Be sure “Install the software automatically” is selected.
2
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
3
Click Finish to complete the installation. Otherwise, be sure the Motorola SBG1000 Wireless Cable Modem
Gateway CD-ROM is correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.