Integra DTR-5.8 User Manual

Page 13

Advertising

Remote Controller—Continued

The remote controller can be used to control different
components including the AV receiver. The remote con-
troller has a specific operating mode for use with each
type of component. Modes are selected by using the six
Remote Mode buttons.

■ Receiver/Tape Mode
In Receiver/Tape mode, you can control the
AV receiver and an Integra cassette recorder
connected via

■ DVD and CD/MD/CDR/Dock Modes
With these modes, you can control a DVD
player and CD Player, MD recorder, CDR,
or RI dock. By entering the appropriate
remote control code, you can control com-
ponents made by other manufacturers (see
page 90).

■ TV, VCR and SAT/Cable Modes
With these modes, you can control a TV,
VCR, and satellite or cable receiver. You
must enter the appropriate remote control
code first (see page 90).

Note:
Some of the remote controller operations described in
this manual may not work as expected with other com-
ponents.

Receiver/Tape mode is used to control the AV receiver.
It can also be used to control an Integra cassette recorder
connected via

Buttons

, and

are used when the Tuner or

Tape input is selected.

Using the Remote Controller

Press one of the Remote Mode
buttons to select a mode.

Use the buttons supported by
that mode to control the compo-
nent.
Receiver/Tape mode:

see right column

DVD mode:

see page 15

CD/MD/CDR/Dock mode:

see page 16

TV, VCR, SAT/Cable modes:

see page 92

Receiver/Tape Mode

6
7

Advertising