Integra DTR-5.8 - Manual (Page 16)

16
Remote Controller—Continued
By default, the remote controller is set to control an Inte-
gra CD player.
 Standby/On button
Sets the component to Standby or On.
 Number buttons
Used to enter track numbers and times for locating
specific points on CD/MD players.
 Disc/Album +/– button
Selects discs on a CD changer, or the next or previ-
ous album on an HDD-compatible component con-
nected to an RI Dock.
 Top Menu button
Works as a Mode button when used with a DS-A2
RI Dock.
 Arrow [ ]/[ ] and Enter buttons
Used to navigate menus on an HDD-compatible
component connected to an RI Dock.
Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous and Next.
Display button
Displays information about the current disc or track
on a CD player or MD/CD recorder, including
elapsed time, remaining time, total time, and so on.
On an HDD-compatible component connected to an
RI Dock, it turns on the back light for 30 seconds.
CLR button
Cancels functions and clears entered numbers on a
CD player or MD/CD recorder.
Menu button
Used to navigate menus on an HDD-compatible
component connected to an RI Dock.
(1 Playlist [ ]/[ ] buttons
Selects the previous or next playlist on an HDD-
compatible component connected to an RI Dock.
(2 Random button
Used with the random/shuffle playback function.
(3 Repeat button
Used with the repeat playback functions.
(4
Play Mode button
Used to select play modes on components with
selectable play modes.
Works as a Resume button when used with a DS-A2
RI Dock.
CD/MD/CDR/Dock Mode
To select the input source, press:
CD player
MD or CD recorder
RI Dock
* If you’re using an MD, CDR, or RI Dock, you must
change the input display (see page 51).
or
8
1
7
5
2
3
4
6
bn
bm
bl
bk
9