Integra DTR-5.8 - Manual (Page 48)

48
First Time Setup—Continued
HDMI Input Setup
If you connect a video component to HDMI IN 1 or 2,
you must assign that input to an input selector. For exam-
ple, if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
If you’ve connected your TV to the AV receiver with an
HDMI cable, you can set the AV receiver so that com-
posite video, S-Video, and component video sources are
upconverted* and output by the HDMI OUT. You can set
this for each input selector by selecting the “- - -” option.
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component video
upconversion for the HDMI OUT, the HDMI Monitor
setting must be set to Yes (see page 47), and the HDMI
Input setting must be set to “- - -.” See page 24 for
more information on video signal flow and upconver-
sion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 50.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Video Input Setup
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “1. Input/Out-
put Assign,” and then press
[Enter].
The Input/Output Assign menu
appears.
IN
OUT
Composite video, S-Video,
component video
Composite video, S-Video,
component video
HDMI
HDMI
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component
Video Input
4. Digital Input
3 Use the Up and Down [ ]/[ ]
buttons to select “2. HDMI Input,”
and then press [Enter].
The HDMI Input menu appears.
4 Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and use the Left and Right
[
]/[ ] buttons to select:
IN 1: Select if the video component
is connected to HDMI IN 1.
IN 2: Select if the video component
is connected to HDMI IN 2.
- - -: Output composite video,
S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in “Compo-
nent Video Setup” (see
page 49).
There are no assignments for TUNER.
5 Press the [Setup] button.
The Setup menu closes.
1–2. HDMI Input
DVD - - -
VCR/DVR - - -
CBL/SAT - - -
GAME/TV - - -
AUX - - -
TAPE - - -
TUNER - - -
CD - - -