IBM 440 - Manual (Page 137)

Chapter 4. Installation 123
Figure 4-10 Network board installation instruction
To install the network driver, follow the instructions:
a. Select Modify and press Enter.
b. Press Insert to add the driver.
c. Follow the instruction until the driver is installed and is loaded in the
NetWare installer screen.
At this point, you will be returned to the list of detected device drivers, which
should now include the network card, as shown in Figure 4-11 on page 124.
Note: NetWare 6 installer automatically detects and installs the ServeRAID
controller driver. You should, however, upgrade the driver once installation
is complete.