IBM 440 - Manual (Page 18)

4 IBM ^ xSeries 440 Planning and Installation Guide
Figure 1-1 x440 configurations currently available
The attachment of a single RXE-100 Remote Expansion Enclosure is also
supported, as shown in Figure 1-1. The RXE-100 has six PCI-X slots standard,
upgradable to 12 PCI-X slots, giving the customer up to a total of 12 PCI-X or 18
PCI-X slots respectively.
In addition to the single-node configurations, three additional two-node
configurations are possible:
A single 16-way system comprised of two eight-way x440 nodes, as shown in
Figure 1-2 on page 5. This will be available in November 2002.
A single 12-way system comprised of an eight-way and a four-way x440, as
shown in Figure 1-3 on page 5. This will be available in early 2003.
A single eight-way system comprised of two four-way x440 nodes, as shown
in Figure 1-3 on page 5. This will be available in early 2003.
Each of these configurations can optionally also have an RXE-100 attached (see
Figure 1-2 on page 5 for an example).
xSeries 440
Two Xeon DP processors, 2-32 GB
Four Xeon DP processors, 4-64 GB
Two Xeon MP processors, 2-32 GB
Four Xeon MP processors, 2-64 GB
Eight Xeon MP proecessors, 4-64 GB
RXE-100
6 PCI-X slots
12 PCI-X slots
One RXE expansion
connection