IBM 440 User Manual
Page 151
Chapter 5. Management
137
The processing of adding an adapter depends on whether the adapter is on the
list of known adapters or whether you have to specify the adapter’s
characteristics.
Adding a known adapter
The process to add a known adapter, such as the IBM Gigabit Ethernet SX
Adapter, is as follows:
1. Select Tools -> Add Card Wizard. You are presented with Figure 5-7.
Figure 5-7 Add Card Wizard
The bottom two check boxes are selected, indicating the following default
settings:
– Active PCI Manager will suggest only slots with hot-plug support (all of the
slots in the x440 and RXE-100 support hot-plug).
– Slots that will not require a server restart.
The Add Card Wizard, when finding the best slot in which to place the new
adapter, may find a slot that needs to reset the bus in order for it to work.
An example would be a 133 MHz PCI-X adapter being added to a bus that
already has a 133 MHz PCI-X adapter installed. Since the hardware only
supports two adapters in the one bus running at most at 100 MHz, the bus