IBM J.D. EDWARDS' ONEWORLD B73.3 - Manual (Page 134)

122 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
• Change JDBOCI73.DLL to JDBOCI80.DLL.
• For B733 - Server Map, put a check mark in the OCM Data Source check
box.
19.Click OK and then click Next if you are setting up another data source.
20.If you are finished setting up the data source, then click Cancel to continue.
21.OneWorld prompts if you want to add another enterprise server. For this
example, click NO. You will see a screen similar to Figure 57 on page 123.
Figure 56. Machine/Server Types Screen
22.Check the appropriate box for other Machine/Server Types. If none of the
servers is selected, then turn off these options. In our example, none of the
items was selected. Click OK. You will see a screen similar to Figure 57 on
page 123.
If any of the above are chosen, then refer to J.D. Edwards’ OneWorld
Installation Guide (Windows NT - Based Systems), Release B73.3 guide.
Note: For WTS (Windows Terminal Server), refer to Chapter 9, “Implementing
Windows NT Terminal Server Edition” on page 251.