IBM J.D. EDWARDS' ONEWORLD B73.3 - Manual (Page 171)

Implementing Oracle8 and J.D. Edwards’ OneWorld 159
Figure 100. User Profiles (User Profile Revisions) Screen
8. Complete the following fields:
• In the User ID field, type the individual’s user ID. For our example, we used
LEIUSER1.
• In the User Class/Group field, type the name of the group to which the user
belongs, such as ACCOUNTING or use the flashlight button to search for this
group. Leave this field blank if the user does not belong to a group.
Note: The flashlight button appears in the field that is selected.
• Enter an address book number.
9. For user or group profiles, complete the remaining fields as appropriate or
leave at the defaults. In our example, we used the defaults. Click OK.
10.To display the profiles you modified or created, on the Work with User Profiles
screen, click Find.
7.6.2 Assigning Packages to a Profile
After creating a user and a group profile, you must assign deployment
preferences to them (for example, packages and environments). In this section,
we will assign Conference Room Pilot (CRP) and Production (PROD) packages
for our user to install. Perform the following steps:
1. From the OneWorld work space, access the Advanced Operations menu
(GH9011) and choose User Profiles.
2. On the Work With User Profiles screen, click Find. You will see a screen
similar to Figure 101 on page 160.