IBM J.D. EDWARDS' ONEWORLD B73.3 - Manual (Page 198)

186 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
contracts). You will need to provide your J.D. Edwards’ Address Book number
and the serial number that appears on the screen, the expiration data and the
number of licenses.
Note: You may be instructed to leave a telephone number and someone from
contracts will give you a call back. It is important that you have a telephone
near the deployment server you’re about to set up.
5. The contracts’ representative will give you an authorization code while on the
telephone; you will enter this code into the Authorization Code field and click
Next. You will see a screen similar to Figure 133:
Figure 133. OneWorld Setup Options Screen
6. In the Components area, we performed the following steps for our example:
1. Click Change Directory and enter D:\ONEWORLD\B733 as the path.
2. For this example, we selected the following components:
• OneWorld
• Production Path Code
• CRP Path Code
Note: Only the CRP (Conference Room Pilot) and the Production Path
Code will be installed for this example. However, depending on your client
or customer specification this will change.
3. Click Next to continue.
7. The program now installs the ODBC Access 7.0 drivers and begins copying its
files to the deployment server. After the files have completed loading, you will
see a screen similar to Figure 134 on page 187.