IBM 2196 - Manual (Page 205)

Table 3 (Page 2 of 4). Network-related settings
To configure: Select: Comments:
Wake on PCI 1. Power Management
2. Automatic Power On
3. PCI Wake Up and
press Enter.
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Startup Sequence
6. Primary or Automatic.
Go back to the main
menu.
7. Start Options
8. Startup Sequence
9. The first, second, third,
and fourth primary
startup devices
10. Automatic Power On
Startup Sequence
11. The first, second, third,
and fourth startup
devices
You might not be able to
select four startup devices
for your model.
Wake on Alarm 1. Power Management
2. Automatic Power On
3. Wake up on Alarm.
4. Disabled or event
parameters (single
event, daily event,
weekly event). After
you select the event,
continue to the next
step.
5. Alarm parameters
6. Startup Sequence
(Primary or Automatic)
7. Start Options
8. Startup Sequence
9. The first, second, third,
and fourth primary
startup devices
10. Automatic Power On
Startup Sequence
11. The first, second, third,
and fourth startup
devices
You might not be able to
select four startup devices
on your model.
17