IBM 2196 - Manual (Page 86)

BIOS Setup configuration 6-15
Typematic Delay (Msec)
When the typematic rate is enabled, you can select the delay between when the key
was first depressed and when the acceleration begins.
Halt On
Use this setting to determine under what conditions the power-on self test (POST)
will halt when errors are detected.
Date and Time
Use this setting to set the date and time.
250 250 msec
500 500 msec
750 750 msec
1000 1000 msec
ALL errors System halts in case of any errors
No errors System won ’ t halt in case of any errors
ALL, But keyboard System halts except for the keyboard error
ALL, But diskette System halts except for the diskette error
ALL, But disk/key
System halts except for the diskette or keyboard
error