IBM 2196 - Manual (Page 206)

Adding and replacing system board components
Refer to the following information when you add or replace system board
components, such as memory connectors, the computer battery or need to
locate other components on the system board.
Table 3 (Page 3 of 4). Network-related settings
To configure: Select: Comments:
Modem Ring
Detect 1. Power Management
2. Automatic Power On
3. MODEM Ring Detect
4. Enabled or Disabled.
If you select Enabled,
go to the next step.
5. Startup Sequence
6. Primary or Automatic.
Go back to the main
menu.
7. Start Options
8. The first, second, third,
and fourth primary
startup devices
9. Automatic Power On
Startup Sequence
10. The first, second, third,
and fourth startup
devices
You might not be able to
select four startup devices
for your model.
18 Type 6344 User Guide Update