IntraServer Technology ITI-90-100250 - Manual (Page 20)

Page 20 of 83
Installing the ITI-8241C-S
Adapter
The ITI-8241C-S Combination host adapter is plug and play compatible with
Sun Solaris SPARC™ systems. All functions of the ITI-8241C-S adapter are
accessible from the front of the adapter. With the addition of the optional
ITI-8241C-R rear I/O module, all functions can also be brought to the rear of
the system.
If you plan on using the ITI-8241C-R rear I/O module, you must configure
your ITI-8241C-S adapter to select rear or front output for the Video and
Ethernet functions.
Configuring SCSI for Rear I/O
The ITI-8241C-S SCSI ports on the front and rear are all active at the same
time. If the Front ports are used alone, or the rear ports are used alone, the
module will terminate the SCSI bus. If the rear and front SCSI port on either
the A or B SCSI channel are used together, the module will automatically
disable the onboard terminators for that port.
No manual configuration of the SCSI termination is required. The state of
the on-board termination can be monitored on the TERM LED on the module
handle.