IntraServer Technology ITI-90-100250 - Manual (Page 70)

Page 70 of 83
Appendix A Connector
Specifications
VGA Video Connector
The VGA interface on the ITI-8241C-S uses the industry standard 15-pin “D”
connector, and is wired as follows:
Figure 15: Video Connector
Connection Signal Connection Signal
1 Red 9 +5V
2 Green 10 Sync Ground
3 Blue 11 Ground
4 Ground 12 Bidirectional data
5 DDC Ground 13 Horiz. Sync.
6 Red Ground 14 Vert. Sync.
7 Green Ground 15 Data timing
8 Blue Ground
Table 9: Video Connector Pinout