IBM Z10 BUISNESS CLASS Z10 BC - Manual (Page 63)

z10 BC Model Structure
Model PU PUs for Max Avail Standard Standard CP/IFL/ Max Max
Customer Subcapacity SAPs Spares ICF/zAAP/ Customer Chan.
CPs zIIP** Memory
E10 4 10 5 2 0 5/10/10/5/5 248 GB 480*
* Max is for ESCON channels.
** For each zAAP and/or zIIP installed there must be a corresponding CP.
The CP may satisfy the requirement for both the zAAP and/or zIIP. The
combined number of zAAPs and/or zIIPs can not be more than 2x the
number of general purpose processors (CPs).
z10 BC Minimum Maximum
E10 4 GB 248 GB
Memory DIMM sizes: 2 GB and 4 GB. (Fixed HSA not included, up to 248
GB for customer use June 30, 2009)
System z CF Link Connectivity – Peer Mode only
Connectivity z10 z10 z10 z10
Options ISC-3 ICB-4 1x PSIFB 12x PSIFB
z10/z9/z990/z890 2 Gbps N/A N/A N/A
ISC-3
z10/z9/z990/z890 N/A 2 GBps N/A N/A
ICB-4
z9 with PSIFB N/A N/A N/A 3 GBps*
z10 1x PSIFB N/A N/A 5 Gbps* N/A
(>150m)
z10 12x PSIFB N/A N/A N/A 6 GBps*
• N-2 Server generation connections allowed
• Theoretical maximum rates shown
• 1x PSIFBs support single data rate (SDR) at 2.5 Gbps when connected
to a DWDM capable of SDR speed and double data rate (DDR) at 5
Gbps when connected to a DWDM capable of DDR speed
• System z9 does NOT support 1x IB-DDR or SDR Infi niBand Coupling
Links
*Note: The Infi niBand link data rate of 6 GBps, 3 GBps or 5 Gbps does not
represent the performance of the link. The actual performance is depen-
dent upon many factors including latency through the adapters, cable
lengths, and the type of workload. With Infi niBand coupling links, while the
link data rate may be higher than that of ICB, the service times of coupling
operations are greater, and the actual throughput may be less than with ICB
links.
z10 BC System weight and IBF hold-up times
z10 Model E10 – Single Frame
w/o IBF w/ IBF
1890 lbs. 2100 lbs.
z10 BC IBF hold uptime
1 I/O 2 I/O 3 I/O 4 I/O
Drawer Drawers Drawers Drawers
1 CPC Drawer 13 min 11 min 9 min 7 min
63