Invacare HMV Highly 300 - Manual (Page 43)

SECTION 9—TILLER ADJUSTMENT
Part No. 1118395 43 300 and 400
SECTION 9—TILLER ADJUSTMENT
ADJUSTING THE TILLER ANGLE
ƽ WARNING
Before performing any maintenance, adjustment or service, turn power OFF and
remove key from ignition.
Ensure that tiller is properly adjusted before driving the scooter.
After making ANY tiller angle adjustments and BEFORE use, the tiller MUST be
securely locked into position. Otherwise, a fall from the scooter could occur causing
bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure
that the tiller is securely engaged into the adjustment plate.
NOTE: For this procedure, refer to FIGURE 9.1.
NOTE: The powered scooters feature an adjustable tiller. The tiller locks into a position that is most
comfortable for you. The tiller can also be folded DOWN for transportation and storage.
1. Pull UP on the tiller release lever located under the RIGHT tiller handle.
2. Push/pull the tiller to the desired angle and release the tiller lever.
3. Gently, push/pull against tiller to ensure that the tiller is securely engaged into the
locking mechanism.
NOTE: The tiller is locked in position when an audible "click" is heard.
FIGURE 9.1 - ADJUSTING THE TILLER ANGLE
UP to
UNLOCK
DOWN to
LOCK
Tiller Release Lever
Tiller
RIGHT Tiller Handle
NOTE: Tiller on 300 shown. Tiller on 400
adjusts the same way.