Intel System Board G4H875-B - Manual (Page 30)

30
2
Hardware Installation
4. After powering-on the system, press <Del> to enter the main
menu of the BIOS.
5. Select the Frequency/Voltage Control submenu and press <En-
ter>.
6. Set the processor’s ratio/clock to its default setting or an
appropriate bus clock or frequency ratio. Refer to the Frequency/
Voltage Control section in chapter 3 for more information.
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select “Save & Exit Setup” and press <Enter>.
8. Type <Y> and press <Enter>.