Intel System Board G4H875-B - Manual (Page 40)

40
2
Hardware Installation
Universal Serial Bus Ports
The system board supports USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of simulta-
neously accessible external Plug and Play peripherals.
G4H875-N and G4H875-C are each equipped with four onboard
USB 2.0/1.1 ports (Black) are at locations CN5 (USB 3-4) and
CN6 (USB 1-2) of the system board.
G4H875-B is equipped with two onboard USB ports (USB 1-2) at
location CN6.
BIOS Setting
Configure USB in the Integrated Peripherals submenu (“Onboard
Device” section) of the BIOS. Refer to chapter 3 for more informa-
tion.
Driver Installation
You may need to install the proper drivers in your operating system
to use the USB device. Refer to your operating system’s manual or
documentation for more information.
If you are using a USB 2.0 device, install the “Intel USB 2.0 Drivers”.
Refer to chapter 4 for more information.
W
G4H875-N/C only
G4H875-N/C/B
USB 2
USB 1
USB 4
USB 3
W