Intel System Board G4H875-B - Manual (Page 85)

8 5
3
BIOS Setup
“EPP (Enhanced Parallel Port)”
Allows bidirectional parallel port operation at maximum speed.
If you selected EPP, the “EPP Mode Select” field is selectable. If you
selected ECP, the “ECP Mode Use DMA” field is selectable. If you
selected ECP+EPP, both “EPP Mode Select” and “ECP Mode Use
DMA” are selectable.
EPP Mode Select
This field is used to select the EPP mode of the parallel port.
ECP Mode Use DMA
This is used to select a DMA channel of the parallel port.
PWRON After Power-Fail
Off When power returns after an AC power failure, the
system’s power is off. You must press the Power
button to power-on the system.
On When power returns after an AC power failure, the
system will automatically power-on.
Former-Sts When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the system’s power is
off when AC power failure occurs, it will remain off
when power returns. If the system’s power is on
when AC power failure occurs, the system will power-
on when power returns.
Game Port Address
This field is used to select the game port’s address.
Midi Port Address
This field is used to select the midi port’s address. If you have
selected the midi port’s address, you may select its IRQ in the “Midi
Port IRQ” field.
Midi Port IRQ
This field is used to select the midi port’s IRQ.