Intel System Board G4H875-B - Manual (Page 8)

Introduction
1
8
Specifications
Chipset
• Intel ® 875P chipset
- Intel ® 82875P Memory Controller Hub (MCH)
- Intel ® 6300ESB Hance Rapids I/O Controller Hub
Processor
The system board is equipped with Socket 478 for installing one of
the following supported processors.
• Intel ® Pentium ® 4 (Prescott and Northwood) processor up to
3.2GHz+
-
Intel Hyper-Threading Technology
- FSB: 533MHz and 800MHz
• Intel ® Celeron ® / Celeron ® D processor
- 400MHz system data bus
System Memory
• Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
• Supports up to 4GB system memory
• Supports Dynamic mode to optimize system performance
• Synchronous operation with processor system bus
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400)
with 800MHz FSB CPU (supports PAT mode). DDR333 will
run at 320MHz memory frequency when used with 800MHz
FSB CPU.
- Use PC2100/PC2700 (DDR266/DDR333) with 533MHz
FSB CPU
- Use PC2100 (DDR266) with 400MHz FSB CPU
• Supports ECC/non-ECC DIMMs
• Supports unbuffered DIMMs
Chapter 1 - Introduction