IBM 1725 SLS - Manual (Page 144)

Keeping the
Printer Clean
QMS 1725 SLS Print System User's Guide 5-8
Cleaning the Transfer-Guide Lock-Tray and
Strip
The transfer-guide area controls the path of the media as it passes
through the printer. Dust can accumulate over time on these guides
and affect the appearance of your print. To clean the transfer-guide area
1 Make sure the printer’s power cord is unplugged and open
the printer top section.
2 With a water-dampened, soft cloth, gently wipe off any dust
that may have accumulated on the transfer-guide lock-tray
and the transfer-guide strip.
O Caution: Be careful not to touch the transfer charging roller with the water-
moistened cloth. Finger oil, scratches, and other contaminants may reduce
the print quality.
3 Using a dry, soft cloth, wipe the cleaned area to remove
moisture.
guide lock-
Transfer-
tray
Transfer
charging
roller