IBM 1725 SLS User Manual
Page 193
Advertising
Duplexer
Assembly
8-9
Printer Options
5 Pull the plate to the right and toward you to remove it from
the slot.
Store the plate in a safe place in case you remove the duplexer
from the printer. If you do remove the duplexer, this plate should
be reinstalled to ensure that the printer operates properly.
6 Remove the two screws on the duplexing unit slot-cover.
7 Push in a little on the right edge of the duplexing unit slot-
cover to unlock it. Then, slide the cover off to the right.
Advertising