IBM 1725 SLS - Manual (Page 165)

Media Jams
6-19 Troubleshooting Printer Problems
2 If the jam is at the front of the fuser assembly, remove the
media by using the green plastic knob at the left of the fuser
and rolling it away from you.
Be careful not to get the media near any clothing. It may contain
some unfused toner.
3 If the media is stuck in the rear of the fuser assembly, open
the green fuser assembly rear door.
Remove the media by turning the green plastic knob at the left of
the fuser to feed the media through the fuser assembly.
M WARNING: Be careful; the area around the fuser assembly is hot.
ACHTUNG! Verletzungsgefahr! Bei Betrieb wird die Umgebung der
Fixiereinheit heiß.
Green
knob
assembly
Fuser
Fuser
assembly
rear door