IBM 1725 SLS - Manual (Page 66)

Emulations
QMS 1725 SLS Print System User's Guide 2-32
Lines/Inch
Sets the number of lines printed per inch.
Line Termination
Adds an indicator which controls the way the printer interprets CR
(carriage return) and LF (line feed) characters.
Point Size x100
Identifies the point size for scalable fonts in 0.25 point increments.
Retain Temporary Fonts and Macros
Allows you to choose whether to retain temporary HP PCL5 fonts and
macros at the end of each print job.
Menu Administration/Emulations/PCL 5/Lines Per Inch
Choices 1-48
Default 6
Menu Administration/Emulations/PCL 5/Line Termination
Choices CR=CR, LF=LF
CR=CR+LF, LF=LF
CR=CR, LF=CR+LF
CR or LF=CR+LF
Default CR=CR, LF=LF
Menu Administration/Emulations/PCL 5/Point Size x100
Choices 00025-99975 (0.25-999.75 points)
Default 01200 (12 points)
Notes If the font is not scalable or if a bitmap font is specified, this
setting is ignored.
Menu Administration/Emulations/HP PCL 5/Retain Temporary